日本語
简体中文
繁體中文
CoolSoniq is a lifting treatment that uses the heat of ultrasound to raise the facial line. Like a magnifying glass focusing sunlight onto one spot, it gathers ultrasound deep beneath the skin to tighten the layer that holds up the face (fascia). Throughout the treatment it keeps cooling the part that touches your skin, so the surface feels less hot and stinging. Its small pen-like tip reaches carefully into curved areas such as the jawline, double chin and around the eyes.
CoolSoniq is an ultrasound lifting device made by the Korean medical device company ASTERASYS. When ultrasound is gathered at a set depth beneath the skin, a heat point smaller than a grain of rice forms there, and as the body repairs that spot, new collagen is made and loose tissue tightens. This approach is commonly called "HIFU". What makes CoolSoniq different is a small cooling unit inside the handpiece that keeps the surface touching your skin cold throughout (patented technology).
Faces sag for different reasons. With you seated, we first look at whether it is because the skin has thinned, the fat has slipped down, or the layer that holds it up has loosened. If your jawline is the part giving way, CoolSoniq is a good fit.
Like a magnifying glass focusing sunlight
Your face is held up by a thin, tough layer beneath the skin (fascia, SMAS). With age this layer loosens, the jawline blurs and the face shifts downward. CoolSoniq gathers ultrasound at the depth of this layer and creates tiny heat points (60–70°C) close together. Ultrasound only becomes hot where it is gathered, so it barely warms the skin surface it passes through. The heated layer contracts, and as the body repairs those spots, new collagen builds up and the line lifts.
From the top: skin surface (epidermis) · skin layer (dermis) · fat layer · fascia (SMAS). The ultrasound gives off heat only at one point at the bottom.
A small cooling unit inside the handpiece keeps cooling the part that touches your skin. When energy is delivered at shallow depths, this stops heat from rising to the skin surface and making it hot and stinging.
1.5 mm for the skin layer, 3.0 mm for the fat layer, 4.5 mm for the fascia. The handpiece is switched area by area, placing heat points close together only at the depth each area needs.
As the body repairs the spots where heat points formed, new collagen and elastic fibers are made and the loosened layer tightens, lifting the line. This happens over 1–3 months.
Cooling technology
In ultrasound lifting, the hot feeling and heat irritation on the skin surface mostly come from the shallow layers close to the surface. When a heat point is made at a shallow depth, the heat above it can easily rise to the surface. CoolSoniq cools the surface touching the skin to protect that upper zone, so that enough energy can still be sent to the depth where it is needed.
| Item | Details |
|---|---|
| Device type | Ultrasound lifting device (high-intensity focused ultrasound, HIFU), Korean MFDS manufacturing approval 2025 |
| Handpieces | 3 pen-shaped · 1.5 mm · 3.0 mm · 4.5 mm depth |
| Cooling | A miniature cooling unit inside the handpiece cools the surface touching the skin (Korean patent No. 10-2842717) |
| Treatment speed | Up to 10 pulses per second |
| Manufacturer | ASTERASYS, Seongdong-gu, Seoul |
Cooling eases the hot feeling on the skin surface. Because sensitivity differs from person to person, areas close to the bone and areas with thin skin are treated at lower strength and wider spacing, and settings are adjusted during treatment as needed.
A different depth for each area
Even on one face, the jawline and the eye area differ in skin thickness and in why they sag. CoolSoniq switches handpieces to aim at a different depth in each area, and its pen-shaped tip glides along the curves of the face.
Find yours
Even with the same CoolSoniq, the handpiece depth, the areas treated and any combined treatments change with your concern. Pick what bothers you most right now and we will show how Dr. NewCell plans CoolSoniq for it. The final plan is set together with the doctor after examining your sagging in person while you are seated.
The jawline and the side of the jaw are tightened deep at the fascia that supports the facial line (4.5 mm), and under the chin one step shallower at 3.0 mm to redefine the border. The line becomes clearer over 1–3 months.
Fascia 4.5 mm + fat layer 3.0 mmSee depths by area →A cooling unit inside the handpiece keeps cooling the surface touching your skin, reducing the hot feeling on the surface. It is done with numbing cream, and if you feel pain, strength and spacing are adjusted right away.
Skin surface kept coolSee how cooling works →Your cheek volume is checked first in consultation, and for people with slim cheeks we leave the center of the cheek untreated or plan mainly at shallow depths. Because ultrasound heat also reaches the fat layer, we take particular care to plan around preserving volume.
Mainly shallow depthsSee the process →The small pen-like tip follows the curves at a shallow 1.5 mm to stimulate the skin layer, and expression lines and texture are finished with Skin Botox or Rejuran. The eyelids and the area right beside the eye are not treated.
Shallow skin layer + expression linesSee combinations →CoolSoniq first tightens the deep fascia to lift the line, then Alltite warms the skin layer to make the skin itself firmer and bouncier. They reach different depths, so they do not overlap.
Fascia + skin layer, split by depthSee combinations →Where there is more fat under the chin, NewCell Fit fat-dissolving injections reduce the volume, and CoolSoniq tightens the loose skin to define the border. Tightening the skin where volume has been reduced gives a cleaner border, so the two are planned together.
Fat under the chin + loose skinSee combinations →These are example plans by concern, not a diagnosis. Depth and amount, the timing of the next session and any combined treatments are decided in consultation based on how much you sag.
Ultrasound · Cooled ultrasound · Focused shortwave · Radiofrequency
Lifting devices differ in how they create heat and how deep that heat reaches. Dr. NewCell runs Ultherapy Prime, CoolSoniq, Alltite and Thermage FLX side by side. We choose and combine them based on how deep the sagging comes from, how much cheek volume you have, and how sensitive you are to pain.
Device characteristics are based on manufacturer data and general operating principles; results and pain vary with skin condition and treatment design. Which device suits you is decided in a consultation, after the doctor checks your sagging while you are seated.
Tightening right away, the line builds slowly
First you feel the heated tissue tighten right away, then the change from new collagen building up comes over several weeks. The line is usually most defined one to two months after treatment.
As the heated tissue tightens, the line feels neater. There may be mild redness.
The area may be slightly swollen or tender to the touch, settling within a few days. Washing and makeup are fine from the same day.
As new collagen and elastic fibers build up, the jawline and the border under the chin become sharper and the skin feels firmer.
The next session is timed to your age and how quickly you sag. Alternating with Alltite lets the deep fascia and the skin layer be cared for separately.
Line: CoolSoniq. Firmness: Alltite.
Lifting lasts longer when each depth is given to the right treatment. CoolSoniq sets the line from deep inside, while the skin's own firmness and texture, and any remaining fat, are each handled by the treatment that fits.
CoolSoniq first tightens the deep fascia to lift the line, then Alltite warms the skin layer to make the skin itself firmer and bouncier. They reach different depths, so they do not overlap. See Alltite lifting
Where there is more fat under the chin, NewCell Fit fat-dissolving injections reduce the volume, and CoolSoniq tightens the loose skin to define the border. Tightening the skin where volume has been reduced gives a cleaner border, so the two are planned together.
The shallow 1.5 mm depth stimulates the skin layer around the eyes and forehead, and expression lines and texture are finished with Skin Botox or Rejuran. CoolSoniq comes first.
CoolSoniq lifts the line, while Trifill PRO fills in the skin layer for enlarged pores and rough texture. The same area is spaced at least two weeks apart. See Trifill PRO
Process
With ultrasound lifting, the result depends on how deep, where, how much, and which areas to leave untreated. This is also where the plan to keep the cheeks from looking hollow is made. That is why the doctor handles everything personally, from consultation to the check after treatment.
With you seated, the doctor checks whether the sagging comes from the skin, the fat or the fascia, and how much cheek volume you have, and reviews your medical history and precautions. There are no consultations by non-medical staff.
Depth and amount are set for each area, such as 4.5 mm for the jawline, 3.0 mm under the chin and 1.5 mm around the eyes, and areas with little cheek fat are left untreated.
After cleansing, numbing cream is applied and the pen-shaped handpiece is moved along the curves of the face. If you feel pain, strength and spacing are adjusted right away.
A lukewarm wash followed by moisturizing and soothing care, then any treatment to combine, such as Alltite, and the timing of the next session are decided.
Aftercare
FAQ
For international patients
CoolSoniq lifts the jawline with ultrasound heat deep under the skin while the handpiece keeps the skin surface cool. With no real downtime you can have it during a short Seoul trip and fly home the next day. English- and Japanese-speaking consultation, right next to Sinnonhyeon Station (exits 5 and 6).
クールソニックは、肌表面を冷やしながら超音波の熱で肌の奥からフェイスラインを引き上げるリフティング。ダウンタイムがほぼなく、短い韓国滞在中でも受けられ翌日帰国できます。日本語相談可。
7F Namyoung Building, 458 Gangnam-daero, Gangnam-gu, Seoul — Dr. NewCell Clinic Gangnam Main Branch
Line 9: from Sinnonhyeon Station exit 5, walk straight; 7F of the building right next to the Apple Store
Shinbundang Line: Sinnonhyeon Station exit 6, to your left; 7F of the building between Starbucks and the Apple Store
Gangnam Station exit 11, about 8 minutes on foot
*Free parking for patients
Director Dr. Shin Yong-bae · 16 years in anti-aging · medical team of 9
CoolSoniq consultations are done by the doctor. If you booked at an event price, that price stands.
The information on this page does not replace a consultation with a doctor. Results and side effects vary between individuals; side effects such as redness, swelling, tenderness, bruising, temporary numbness and, rarely, burns may occur. The video at the top of the page is official CoolSoniq advertising material from the manufacturer ASTERASYS (Korean medical advertising review approval no. 52025-ET1-45-8656). The person in the video is Hyun Bin, CoolSoniq's advertising model; he is not a promotional model for Dr. NewCell Clinic, and this is not a Dr. NewCell treatment case or endorsement. Skin cross-section and face images are illustrations to aid understanding. Device specifications and comparison information are based on manufacturer's published data. Dr. NewCell Clinic · Business registration 380-22-01983.
